3D profile for Davenport 3/4" door.

3D profile for Davenport 3/4" door.

Davenport 3/4" Routed Drawer Front (852R)

  • Minimum Width: 6.5"
  • Maximum Width: 33"
  • Minimum Height: 4.5"
  • Maximum Height: 10"
  • Thickness Of Door: 0.75"
  • Center Rail at: 196.8504"

A1: If one minimum is used, add 2" to the other.

B5: If changes to type or placement of grooves is wanted, call for availability and pricing.

D1: Maximum height cannot be exceeded.

E1: Center rail required at 48" and above.

S1: Center rail, if required, is 2-1/2".

W1: Minimum French Lite opening required 3-1/2" x 3-1/2" before molding.

I2: Requires additional delivery time.

S2: 5-Piece drawer fronts are standard vertical grain with grooves.

C1: Maximum can be exceeded with No Guarantee and possible option charge.

C3: Must be ordered door size. Singles only.

I3: Rounded groove is 2" apart.

C4: Outside edge detail steps down 1/16" inch.

Z4: Between Cut Down Min. and Min. Size W" x H", additional small stile/rail charge applies. Same cost as 5-Piece drawer front charge.

Solid Drawer Front is not available. For a solid drawer front order a Laguna Solid DF (853D) with OE480 outside face edge. The Davenport Routed Drawer Front has a beaded outside face edge to match the door. Due to special machinery considerations, the absolute maximums for the Davenport are 26-1/2" x 62". For extra wide doors we can manufacture up to 32" if the height remains under 26-1/2".